The ECI 80D is our brand new, entry-level integrated amplifier. The new ECI 80D offers 2 x 80 Watts into 8 Ohms, using an in-house developed Class A/B Amplifier.
We have equipped it with a built-in RIAA pre-amplifier for your LP player (MM cartridge support), 2-way Bluetooth HD for both streaming from your iOS, Android unit, Mac or PC, and also HD streaming to your High-end headphones. And of course a 5-input DAC (3 Toslink, 2 COAX)

 

Fully balanced integrated ECI 6 amplifier 

The new ECI 6 is a powerful integrated amplifier equipped with a 4 analogue inputs. The ECI 6 offers 2 x 125 Watts and is based on the successful ECI 5 MK II. To enhance it, we have equipped the ECI-6 with an even better power supply and a more sophisticated preamplifier module. As a result we can offer you an extremely substantial and dynamic amplifier, capable of controlling a wide range of speakers on the market.

Analogue sources can be connected to one balanced (XLR) input and three single-ended (RCA) stereo inputs. With two preamplifier outputs, one balanced and one single ended, the ECI-6 is ready for future expansions. The input stage is built from discrete circuits running in class A with zero feedback. The output stage runs with moderate amounts of negative feedback, carefully balanced between good bass extension and control, a detailed open midrange and a warm detailed top. All to ensure that the ECI 6 will reproduce your favourite music the way it was recorded.

 

Electrocompaniet ECI (Integrated amp)

£2,399.00Price
Option
  • Preamplifier section     

    Input impedance ( Balanced input )    47Kohm

    Maximum input level    10 Volt RMS

    Noise floor ( 1Vrms, 20 - 20 kHz, balanced)

    -135 dB

    THD + N   (1Vrms, 20 - 20 kHz, balanced)        <0.004%

    Gain (Balanced)    0 dB

          

    Amplifier section     

    Output Impedance    < 0,02 Ohm

    Frequency response    1 – 150 kHz

    Channel separation    > 120 dB

    THD ( 20 - 20 kHz)    < 0.004%

    Maximum peak current    >100A

    Damping factor  8 ohm load    >350

    I Input sensitivity  120W output    1.3Vrms

    Input sensitivity HT  120W output    1Vrms

    Gain HT Input    x36 (31 dB)

    Rated output power     

    8 ohms    2 x 125 W

    4 ohms    2 x 200 W

    2 ohms    2 x 370 W

    Power consumption               

    110 W

    Standby    1W (no load or signal)     

    Dimensions     

    Width    465 mm / 18.3 inches

    Depth    405 mm / 16 inches

    Height    128 mm / 5 inches

    Weight    20Kg / 44 lbs.

  • PREAMPLIFIER:

    Input impedance: 75 kOhms

    Noise floor:< -130dB

    THD+N: < 0.002%

    Frequency response (-3dB): 1 – 150 kHz

    Volume adjustment range: - 110dB to +15 dB

    OUTPUT AMPLIFIER:

    THD+N: < 0.005%

    Output power (into 8 Ohms): 2 x 80W

    Output power (into 4 Ohms): 2 x 150W

    Damping factor (8 Ohms load): > 300

    Frequency response (-3dB): 1 – 150kHz

    SNR (input shorted, ref 1W into 8 ohms, A-weighted): 102 dB

    Gain: 25 dB

    Protection: DC, overload, temperature

    RIAA PHONO:

    Pickup support: Moving Magnet

    Gain: 40 dB @ 1kHz

    Input impedance: 47 kOhms || 100pF

    RIAA correction accuracy: +/-0.1dB, 25-20kHz

    Subsonic filter: -3 dB @ 14 Hz

    THD: < 0.001%

    SNR: 83 dB (A-weighted)

    Overload margin: 30dB @ 1kHz

    HEADPHONE AMPLIFIER:

    THD+N: < 0.001%

    Load impedance single output in use: > 16 Ohms

    Load impedance both outputs in use: > 32 Ohms

    Max output power (into 16 Ohms load):  0.4W

    Max output voltage swing: +/-8V peak

    Output impedance: 10 Ohms

    Protection: DC, overload

    DIGITAL & STREAMING:

    Optical input: PCM: 44.1kHz/16bit up to 192kHz/24bit

    Coaxial input: PCM: 44.1kHz/16bit up to 192kHz/24bit

    Bluetooth support: BT5.0, A2DP, SBC, AAC, aptX-HD

    CONNECTIVITY:

    Digital inputs: 2 coaxial, 3 optical

    Analog inputs: 2 RCA

    Analog preamplifier output: 1 RCA

    Service port: 1 USB

    12V trigger: 1 input, 1 output

    Phono MM: 1 RCA

    Headphone outputs: 3.5mm jack + 6.35mm jack

    Speaker outputs:  1 pair binding posts

    WEIGHT & DIMENSIONS:

    Weight:  8 kg – 17.6 lbs

    Width:   470 mm – 18.5 inches

    Depth:    262 mm – 10.3 inches

    Height:   90 mm – 3.5 inches

    VOLTAGE & POWER CONSUMPTION:

    Mains input voltage: 100-240VAC, 50/60Hz, 3A

    Idle (no load or signal): 30 W

    Standby: < 0.5 W

    OFF (main switch OFF): 0 W

CHARIO UK ON-LINE BOUTIQUE

managed by UK importer

iStereos Ltd

Reg: 6473488

VAT: 128 9708 77

Frinton-on-Sea

CO13 9EF

01206 625 221

07763 793 321

SUBSCRIBE
  • Twitter
  • Grey Facebook Icon
  • Grey Vimeo Icon

© 2020 chario. Proudly created by iStereos Ltd

0
charrio_clear.png